Steps To Carry Out The Replacement Job Of A Broken Shingle
The leaks and holes resulting due to a damaged shingle may affect the overall integration of the roofing segments. It not only enhances the intensity of a damage but also allows an easy passage for water to seep through the internal walls and ceilings.
Instead of availing the service of a professionally acclaimed roofer on the very onset, you can yourself take the daunting task in your own hands. Though the task appears a bit complex and daunting at first sight, it can turn out to be much less demanding if proper logic is applied.
To complement the right course course of action, a right blend of tools and supplies would also be needed. Though all the tools are of utmost importance but a pry bar tool would play a key role in the entire project. The pry bar would do the actual task of dissociating the damaged shingle from the rest of the roofing setup. Also, make way for a small-sized wooden bar.
Remember that most roofing repairs are prone to minor/major nicks and bruises on your body and hence, it becomes quintessential to carry a first-aid along with you. It would comprise of the regular medicines and bandages along with a pair of safety gloves and goggles.
The first phase of the project covers the detachment process of the damaged asphalt shingle. Install an extension ladder to the roof such that the ladder doesn’t shake or fumble owing to exertion of weight. To protect yourself against a possible fall down from the roof, tie yourself to a rope where the other end of the rope is attached tightly to a ridge or a metal structure.
Tap the business-end of the pry bar tool under the damaged shingle just above the gap between tabs. Push it in gradually until the nail-pulling end of the tool gets centered on the nail of the shingle. Now push down the other end of the tool and notice a slight movement of the concerned nail. Once the nail is partially uprooted, insert a small wooden bar just below the head of the nail and resume exertion of pressure from the other end. Eventually, the nail would be completely uprooted.
Remove all the other nails with the same method and pull out the damaged shingle from the setup. Replace the old asphalt shingle with a new one and nail it down well. Make sure that the new shingle has similar dimensions to the old one. Apply a moderate amount of roofing cement on the nails to bind them well to the shingle.
Put some cement in the gaps under the tabs that were altered during the detachment task and add final touch to the installation job.
Scott Rodgers is a fine expert who has been authoring on roofing for a long time now. His extraordinary guidance has given motivation to a host of workers, ranging from Elk Roofers (Need one? click here!) to Long Beach Roofers (Need one? click here!).
