You are now the owner of your first portable automobile air conditioner and won’t be sure the easiest way to install it. Follow these simple axioms and you’ll enjoy hours of carefree use.
Take away the unit from the packaging it came in. Find the factory taped up areas and remove these tapes as they only keep dust from entering the new cooler. The unit is now ready for filling.
Unscrew the cap on the water tank and rinse the unit well with clean water. This will remove the plastic smell that may be present. Do not use any chemicals to rinse the cooler with, just water. Fill the water tank up to the mark indicating the maximum level. Screw the cap on tightly to prevent leaks.
Fill the water tank up to the mark indicating the maximum level. Screw the cap on firmly to stop leaks. Your cooler is now ready to function and only need an electrical connection. Be terribly careful not to connect the cooler to your place mains, as the higher voltage will cause the motor to burn out.
The air conditioner wants a twelve-volt connection and your automobile battery delivers that charge via the ciggie lighter socket. Plug the cooler into the socket using the special adapter supplied with your kit. The fan should start blowing right away. It needs a while for water to wet the evaporation area, so give it a minute or two. Soon you may feel the air coming out cooled down a lot. The conditioner can now be placed in position.
Be really conscious of where you place the portable car air conditioner as it may move during driving and will even fall into the pedal area of your automobile causing major Problems for the driver. Rather choose a place where you can secure the unit safely and out of the way. Use the straps to tie it down as a further safety care.
Andre writes articles on different fields of interest. If you like this post, you may visit his site at http://www.portablecarairconditioner.net, to read more about Portable Car Air Conditioner.
